Foamsekure® BMS is used for bonding coated timber and PVCu glazing bars and PVCu trims. Foamsekure® BMS can also be used for mounting lightweight components typically found in the automotive, caravan and electrical industries. The exposed side adhesive is specifically designed for adhesion to PVCu and other low surface energy sash and frame materials and the liner adhesive is specifically designed for adhesion to glass. These surface specific adhesives provide optimum performance, weather resistance and longevity. Double-sided closed-cell foam tape.

10mm x 2mm x 30MTRS black

Foamsekure BMS

£6.25

Quantity

• Excellent long-term adhesion to a wide variety of surfaces, including timber, PVCu, steel, aluminium, plastic composites and glass

• Supplied on single strand reels with an ‘easy peel’ backing

• Approved for use with Pilkington Activ  self cleaning glass. Use immediately – no special primers required

• Differential adhesive system provides improved structural performance and weather resistance

• Easy to compress

• Polyolefin foam provides excellent weatherseal and durability. Superior initial tack
Surface preparation: All surfaces should be clean, dry and free from frost, grease, loose materials and flat.

It is recommended that propan-2-ol (IPA) is used to clean the substrates. Ensure the cloths used are clean and allow the surface to dry prior to application of the product. Foamsekure® BMS is designed to be applied directly to the joint surface and no special primers or sealers are required. Timber surfaces should be coated with at least one coat of a base stain or paint primer and allowed to fully dry prior to application of Foamsekure® BMS. Apply adhesive face down to one of the joint surfaces in the required position; aligned flush with the glazing bar.

Telephone 01386 701079

Email shop@mikehonourwindows.co.uk

Foamsekure BMS

Applications

Properties

Instructions